Fiber hose is also called: glass fiber sleeve, fiber high temperature sleeve, ceramic fiber sleeve, fiber sleeve is a sleeve made of glass fiber reinforced braid, suitable for continuous high temperature operation at 538 degrees. Its insulating capabilities and low price point make it an economical choice for protecting hoses and cables. There are several types of fiberglass sleeves according to the process: single-layer glass fiber tube, outer rubber inner fiber glass fiber tube, and inner rubber outer fiber glass fiber tube. The withstand voltage levels are: 1.2kv, 1.5kv, 4kv, 7kv, etc. Generally, there is no such ranking, but light pipes generally refer to PVC pipes, which are more famous.
Precautions for using PVC hose: Be sure to use PVC plastic hose within the specified temperature and pressure range. When applying pressure, open/close any valves slowly to avoid shock pressure that could damage the hose. The hose will expand and contract slightly with the change of its internal pressure, please cut the hose to a slightly longer length than you need when using it. Use hoses that are suitable for the fluid being loaded. Consult a professional when in doubt whether the hose you are using is suitable for a certain fluid. Do not use non-food-grade hoses for the production or handling of food products,
Provide drinking water and cook or wash food. Use the hose above its minimum bending radius. When the hose is used for powder and granules, please enlarge its bending radius as much as possible to reduce possible wear and tear on the hose. Do not use it in an extremely bent state near metal parts. Do not place hose in direct contact with or near an open flame. Do not run over the hose with a vehicle, etc. When cutting steel wire reinforced hoses and fiber steel wire composite reinforced hoses, the exposed steel wires will cause harm to people, so please pay special attention. Precautions during assembly: Please choose a metal connector suitable for the size of the hose and match it with it. When inserting the scale groove part of the joint into the hose, apply oil to the hose and the scale groove, and do not burn it with fire. If it cannot be inserted, heat the hose with hot water and insert it. Precautions during inspection: Before using the hose, please confirm whether there is any abnormality in the appearance of the hose (trauma, hardening, softening, discoloration, etc.); during the normal use of the hose, be sure to implement a regular inspection once a month . The service life of the hose is largely affected by the characteristics of the fluid, temperature, flow rate, and pressure. If abnormal signs are found in the pre-operation inspection and regular inspection, please stop using it immediately, and repair or replace the hose with a new one. Precautions when storing the hose: After the hose is used, please remove the residue inside the hose. Please store it indoors or in a dark and ventilated place. Do not store the hose in an extremely bent state.
Post time: Feb-05-2023