When connecting two plastic pipes together, plastic pipe joints are generally required, so how should the plastic pipe joints be connected? Let’s take a look at the detailed introduction of this article with the editor.
1. How should plastic pipe joints be connected?
1. Put it on directly: Some plastic tubes can be combined directly. If the plastic tubes purchased by the user can be combined together, you can put the two plastic tubes together directly. If you are worried about the connection of the plastic tubes If the position cannot be firmly connected, iron wire can be used to wrap around the periphery of the plastic pipe at the connection position for reinforcement.
2. Thermal expansion socket: first cut the socket of the plastic pipe into a groove shape, and then apply some adhesive on the outer wall and inner wall of the inserted plastic pipe mouth. At this time, the oil temperature must be controlled so that it cannot be burned. Thus avoiding damage to the plastic pipe. Then plug the two plastic pipes together. When the plastic pipes are connected together, a layer of waterproof cloth should be wrapped around the connection position to protect the joint position.
3. Special glue connection: apply some special glue on the interface of the plastic pipe, and then connect them together. When smearing, it must be applied evenly, and it should not be applied too much. You can just press the plastic tube on it.
4. Hot-melt connection: Use a special hot-melt instrument to heat-melt the interface of the plastic pipe, and then connect the two interfaces together. This method has relatively high requirements for operating technology. It is recommended that you should ask professionals to help you operate, so as to avoid accidents.
Post time: Jan-15-2023